How to Get VoLTE on Asus Zenfone 2 Laser ZE550KL 2gb

Requirements to get VoLTE feature.

• Adb and Fastboot Tool
• VoLTE File

Note :- Do this all at you’re own responsibility. I or zenfonehelps.net wont be responsible if you mess up with your phone.

Steps to Get VoLTE on Asus Zenfone 2 Laser ZE550KL.

 

First download the VoLTE file from requirements section.

• Now move it to Adb and fastboot folder. 

• Now connect your phone to USB and enable debugging mode by going into settings>about>Software information>click on Build number 5-7 times and then go back to settings you’ll see developer options then click on enable USB debugging.

 

• Now press Shift key of keyboard + Right Click of mouse and choose Open Command Window Here.

 

 

• Now Command prompt will open then copy paste the below command

.

  

adb devices Check your phones screen there should be a pop up. Click on always trust this computer and press ok.

• adb reboot bootloader Now your phone will be on fastboot mode.
• fastboot devices Now it should show some serial number like FAXXXXXXX
• fastboot flash modem volte.img Let it get complete and it will show [OKAY]

  Thanx..

  If You Have Any Questions Comment below....!!

Read More

How to turn ON DeaD Moblie and Rom Install CoolPad Dazen 1

Unbrick Coolpad Dazen1 Qualcomm HS-USB QDloader 9008, No Fastboot

DISCLAIMER: I have personally revived my Coolpad Dazen 1 (8297L-I00) using this method and tested it twice by hardbricking and unbricking my device before posting it here. I bear no responsibility of whatever that happens to your device/sdcard/computer by using this guide. 

What will you need?
• A dead Coolpad Dazen 1 (8297L-I00)
• A PC/Laptop.
• A 2GB or above MicroSD Card. (2GB would suffice)
• Win32DiskImager
• eMMC image of Coolpad Dazen 1. Download
• Stock Rom with flash tools & drivers. Download
• A little brain and common sense.

Steps:
• Connect your MicroSD card to PC in mass storage mode using any card reader or old phone which supports mass storage mode.

• Format your MicroSD card in FAT32 format, quick format will work.

• Extract Coolpad Dazen 1 eMMC image to a folder. It will be of 200MB after extracting.

• Install Win32DiskImager and write Coolpad Dazen 1 eMMC image to your MicroSD card. Kindly select the right drive letter for your SD card otherwise your will severely damage any other drive or your PC hard disk.

• After successful completion of writing eMMC backup image to SD card, insert the MicroSD card in your device and remove all sim cards. Insert battery into your device now. Do not power it on yet.

• Now you can boot to fastboot mode with the eMMC image on SDCARD.

• Connect your phone in fastboot mode, steps for which are : -
A. Press and hold the Volume Up key
B. With the Volume Up key, connect the phone to your PC/Laptop with USB cable
C. Press volume up to confirm on the first screen.

• Now you can flash the stock firmware with ygdp tools. (There's plenty of guide for flashing with YGDP tools. Google is your friend)

• DO NOT disconnect the device during flashing procedure.

• After the flashing procedure is completed, disconnect the USB cable, remove the microSD card and boot the phone normally by long pressing the Power button.


Your Coolpad Dazen 1 is unbricked now.

Read More

Asus ZenFone Max Full firmware with VoLTE Support

Download Asus ZenFone Max Full firmware with VoLTE Support (WW 8939-13.8.26.80)

In the below guide we will provide all the required information for updating your Zenfone Max (ZC550KL) to the latest version manually. Still based on Android Marshmallow, the new update includes VoLTE, update for several apps, fixes bugs and supports SOS call for India.

Important: The below guide is for Zenfone Max ZC550KL and SKU WW. Do not install the firmware on other SKU (CN, TW, etc.). Check it by going to 

Settings > About > software information > Build number and see the software version for WW, CN, JP, etc.

Note: Backup all data you have on the phone before proceeding, as the update process will delete data.

Manually Update ZenFone Max latest version

Disclaimer: Follow the instruction at your own risk. We will not be liable if any damage occurs to your device and/or its components.

Step 1: Download stock firmware zip file for ZenFone Max (version 13.8.26.80) from Download and save the zip file on your phone’s internal storage.
Step 2: Software update notification will pop up on your Zenfone screen. Just tap to update.

[If the above method does not helped, you may try the recovery method described below] 

1. Copy and paste the downloaded firmware zip in to the SD card of the phone

2. Boot your phone into recovery mode by pressing and holding Power & Volume Up buttons after switching off the phone.

3. In recovery, select Apply update from sd card, select the firmware zip file.

4. Once the installation process finished, reboot your phone.

Thanx.... 

if You Have Any Questions Comment BELOW....!!

Read More

DOLPY INSATLL REDMI MOBILES

 DOLPY INSATLL REDMI MOBILES

Download Dolby Atmos file here https://drive.google.com/open?id=0B0uLf24J8aCZQ2lxYVkxM3N0cFE

- Before you flashing, you must root your device.

Go to Security - Tap Root access, wait for a minute (It uses a data connection or wifi).
when finished will restart automatically



- Now go to Tools - Updater - tap three dots in the upper right - choose Reboot to Recovery mode.


- in TWRP Recovery Select install - sellect the file that you downloaded - swipe to confirm flash and wait a minute - done and Reboot System.





Good luck.

Read More

How to INSTALL TWRP Recovery In Redmi MobileS

[TUTORIAL] Replace Kingroot With SuperSU......

- Download and install terminal emulator ( in playstore )
- Download And extract this file https://goo.gl/j7QgjV
- Put Folder " mrw " extract results earlier in the internal contents there are 4 files   
- Open Terminal emulator type: su   
- Allow Root permissions, type: sh /sdcard/mrw/root.sh   
- If An error message. Just continue until further appears SuperSU or open its app   
- Update Su binary select Normal   
- Reboot.
* Thanks to [OFFICIAL] Xiaomi Redmi 3 Indonesia facebook forum

[TUTORIAL] DOLBY ATMOS REDMI 3 (Stable Rom)
- Download Dolby Atmos file here https://drive.google.com/open?id=0B0uLf24J8aCZQ2lxYVkxM3N0cFE
- Flashfire apk (Thanks to XDA Dev) here https://drive.google.com/open?id=0B0uLf24J8aCZbnNRT3RyV3hXbms
- Install Flashfire apk and open.

- Grant Superuser request


- Press image +


- Choose Flash ZIP or OTA




- Find dolby atmos file in internal storage

Screenshot_2016-03-15-19-51-16_eu.chainfire.flash.png (142.4 KB, Downloads: 0)
Download  Save to the album

- Select FLASH then push OK button
- Wait 5-10 Minute
- Your phone will be blank for a while. Do not worry
- Phone will automatically reboot when it is finished. And dolby atmos already installed on your Redmi 3



Good luck.

Read More

How to Root Xiaomi Redmi 3 without PC & unlock Bootloader

How to Root Xiaomi Redmi 3 without PC & unlock Bootloader - 100% OK

IMPORTANT:
For old MIUI version only !!!


Step 1: Enable USB debugging

Step 2: Settings >  Addtional settings > Privacy > enable Unknown source
 
Step 3: Download files Root_Xiaomi_Redmi3.apk
 
httpS://simizer.com/4We

Big thank Shuame team!
 
Step 4: Install Root_Xiaomi_Redmi3.apk file. Then open and press Root, the process will take place automatically until Root completed

Good luck !!!

If You have Any QUESTONS Comment Below....!!

Read More

How To Install Custom ROM on Android

Custom ROMs are one of the best things about Android! If you’re ready to ditch your stock ROM and reap the many benefits of loading a custom ROM such as improved battery, better performance, and updates to the latest Android versions, then follow this guide. Backup your data before you proceed! If you want to learn more about what a custom ROM actually is, we have a guide for that.

For this guide, you will need:

• Unlocked bootloader
• Custom Recovery
• Android Device
• GApps
• Custom ROM

Step 1: Download a ROM

Find a ROM for your device, using the appropriate XDA forum. Make sure you download the right one for your device. Many phones have several variants. The Sony Z Ultra has more versions than I have friends, and both of them require different ROMs based on the carrier it comes on. So make sure you are getting the correct ROM, by verifying that it’s compatible with your phone model.


Once you have found the ROM you want, download the .ZIP file, which is going to be 500mb up to 1.5Gb. Do not extract it! Then find the corresponding GApps. If you are installing a ROM running on 4.4.2, you’ll want a GApps package for 4.4.2. Save your ROM and GApps to your SD card, internal storage, or flash drive.

Step 2: Boot into Recovery

To boot into recovery use your recovery combo buttons. If you don’t know which buttons to press, to access recovery, see this guide. On most devices it is Hold Vol Down + Power for 5 seconds. Once you are in recovery, you should see something like this…

 

This is TWRP! Woot!

And this is ClockworkMod! Double woot!

Step 3: Flash ROM

Now go ahead and select “Install”…

 

  

Install on TWRP

 

Install in ClockworkMod

Once you have selected your ROM file. Proceed to flash the zip…

 

Apply update in TWRP

 

 

Apply update in ClockworkMod

 

 

Flash the file with TWRP

 

 

Flash the file with ClockworkMod

Step 4: Clear Cache

After the install is complete, back out and clear your cache…

 

Wipe with TWRP

 

 

Wipe with ClockworkMod

 

While this is the most common way to flash a ROM, there are many different ways specific to each device. I’ll list a few of the most common pieces of software that will allow you to flash a ROM from your computer. These are better to use when you’re flashing the stock ROM back onto your device.

• For Nexus devices, use Nexus Root Toolkit
• For Samsung devices, use Odin
• For Sony devices, use FlashTool

Read More

Install new update Xiaomi Redmi 4A MIUI 8.2.6.0 FastBoot stable Rom:

Install new update Xiaomi Redmi 4A MIUI 8.2.6.0 FastBoot stable Rom:

Step 1: Download and install Mi Flash Tool and download Xiaomi Redmi 4A MIUI 8.2.6.0 FastBoot stable Rom and extract zip or rar file in desktop on your PC. Now Power Off your device and long press volume down and power button to FastBoot mode. See in this image.

Step 2: Your phone is going to FastBoot mode. Now, connect your Xiaomi device to computer using USB cable. And Open Xiaomi flash tool and locate the Xiaomi stock firmware and click on refresh button, this will allows Xiaomi flash tool to recognize your device.





Step 3: Now, click on Flash button to start flashing process. Once, flashing process is completed you will see Success message in Xiaomi Flash Tool.

After 
install new update Xiaomi Redmi 4A MIUI 8.2.6.0 Global stable Rom, you can root your phone because root allows you to use a maximum of your phone without any restrictions. After root you will install custom apps, Rom and custom setting in your phone. But first read Root Advantage and Disadvantage by this article.

I hope you like this new update Xiaomi Redmi 4A MIUI 8.2.6.0 Global stable Rom installation guide from which you will be able to easily install new update Xiaomi Redmi 4A MIUI 8.2.6.0 Global stable Rom without any extra efforts. If feel any problem in this guide then please use comment box. Thanks to all

Download Rom and tools of Xiaomi Redmi 4A MIUI 8.2:

File Name	Download link
Xiaomi Redmi 4A MIUI 8.2.6.0 Recovery Stable Rom	Download
Xiaomi Redmi 4A MIUI 8.2.6.0 FastBoot Stable Rom	Download
Xiaomi Redmi 4A USB Driver	Download
Xiaomi Mi Flash Tool	Download

 ThankYou....

if You Have Any Question Comment Below..!!

Read More

How to install Xiaomi Redmi 4A MIUI 8.2.6.0 Recovery stable Rom

How to install Xiaomi Redmi 4A MIUI 8.2.6.0 Recovery stable Rom:

This is easiest method for install MIUI 8.2.6.0 in your Xiaomi Redmi 4A.  

Just follow these steps:

Step 1: Download MIUI 8.2 zip file and rename this zip file as “update.zip” like miui_HM4AGlobal_V8.2.6.0.MCCMIDL_3b4006d491_6.0.zip to update.zip.

Step 2: Connect your phone to PC and copy the zip file into your Phone Internal Storage. Do not copy the zip file into any folder or SD card!!

Step 3: Go to Updater App from your phone app menu, tap on the setting icon, it is a 3 dots icon on top right corner (see in this image) and tap on the “Choose update package” tab. Now you can see your phone storage, Scroll down and tap on the update.zip file. See in this image.








Step 4: Now your phone is going to Reboot in recovery mode and Rom flashing process start. Don’t interrupt this process, it might to take 4-6 minutes for your phone to first boot on MIUI 8.2.6.0 Global stable Rom.

Download Rom and tools of Xiaomi Redmi 4A MIUI 8.2:

Xiaomi Redmi 4A MIUI 8.2.6.0 Recovery Stable Rom	Download
Xiaomi Redmi 4A MIUI 8.2.6.0 FastBoot Stable Rom	Download
Xiaomi Redmi 4A USB Driver	Download

ThankYou 

If You Any Questions Comment Below.....!!

Read More

Lenovo A7000 Vibe UI 3.1 Marshmallow 6.0

Lenovo A7000 Vibe UI 3.1 Marshmallow 6.0 With Primary As SD Storage

How To Update Lenovo A7000 : http://gamoding.blogspot.in/2016/04/...mallow-60.html

Video : How To Update Lenovo A7000 Vibe UI 3.1 Marshmallow 6.0 With Primary As SD Storage [HD]

1. A7000 AOSP ROM 5.0 With Android M Preview

Video : Lenovo A7000 AOSP ROM 5.0 With Android M Preview [HD]

AOSP 5.0 Stallion Mod For Lenovo A7000 With SD Storage Option

Info & Download Link : http://clkmein.com/qBSrAr

Video : AOSP 5.0 Stallion Mod For Lenovo A7000 With SD Storage Option Video

Change log For AOSP V1.1 :

1. its smooth as well as stable
2. Stock no themes.
3. bugs : only red led is working.
4. Dolby Atmos

Required Files :

AOSP Rom & Android M Launcher :

Links : http://pastebin.com/ini1N422

AOSP Rom Ported By Kishore A.K.A puchupechu

xda thread : puchupechu

How To Root :

1. Download CWM/ TWRP recovery
2. Flash via Sp flash tools( da with all checksums)
3. Download updatesu.zip from above.
4. Put the zip in sd card.
5. Reboot to cwm/TWRP recovey
6. Select update from sd
7. Choose the zip and update

How To Install Rom :

1.Download the rom from above.
2.download quick reboot apk
3.open quick reboot app press recovery.
4.install from sd card i.e flash the rom.
5.you're done.

2. Vibe Ui Rom

Rom Ported By : Bidyadhar Mohanty
2.1. Vibe Ui Lite V1 .0 Rom


Rom Ported By : Allah S.W.T
-Om Nobita Iful
-Om Rheen Panglima Rock
-Yonathan Aryanda Wijaya
-Reiki Arlansyah
-Gan Reza Gilang Pratamadinata
-Dan mastah lain-nya yang udah bantu ane dari dulu sampe sekarang
 -Serta kalian yang udah mau nyobain rom perdana ane

How To (Video & Files Link In Description)

Root Video : Root Video CWM

Vibe UI Rom Video : Vibe UI

How To (No Video Only Instructions & Files) :

puchupechu

Change log :
1. its smooth as well as polished
2. It has unlimited amigo themes and a variety of apps..
3. EN/CH Lan Available.
4.Dolby Atmos
5. Simple music player
6. MIUI Like UI
7.Custom Fonts.

Vibe 3.0 SD Storage Option Donwload & How To Link : Click Here

Video Overview : Click Here

3. Amigo 3.0 Rom Ported By : Bidyadhar Mohanty

Amigo 3.0 Rom DL

Download & flash gapps 5.0

Amigo 3 0 Lollipop Rom Overview Ported To Lenovo A7000

Change log :
1. its smooth as well as polished than vibe Ui
2. It has unlimited amigo themes and a variety of apps..
3. bugs : cam not working with flash. but cam without flash is itself working.
4. DTS (sound_system)
5. Walkman like music player
6. MIUI Like UI
7.Custom Fonts.

Read More

How To UnBrick Lenovo Mobiles

Most of the people facing the problem : (Bricked lenovo a6000/plus )

Device not showing in adb i'm i right ?

If yes follow the following things smile emoticon

1. install minimal adb and fastboot
2. install lenovo driver
3. install lenovo smart assistent

Now connect your phone to pc/laptop and pen minimal adb (py_cmd ) as administrator smile emoticon
Now Enter the Following Command :

 adb shell
              (now your device will not be listed )
Now Enter the Following Command :
fastboot boot recovery.img
               now you get thing like <waiting for device >
Now remove battery and keep and now go to fastboot mode smile emoticon done your device will be listed and recovery will be flashed and
Now your device is ready to install custom rom

Download Minimal ADB & Fasboot Tool

1. Minimal ADB & Fastboot 1.4.3: Download | Mirror [Latest]
2. Minimal ADB & Fastboot 1.4.2: Download
3. Minimal ADB & Fastboot 1.4:0    Download | Mirror
4. Minimal ADB & Fastboot 1.3.1: Download | Mirror

Read More

Lenovo A6000 Android Kitkat S042_151012 Official Stock ROM Zip File

 

Free Download original and official stock ROM for your Lenovo A6000 Android Kitkat Kraft-A6000 S042_151012 from Lenovo server. If you want to flash your device to original Stock ROM without losing your device’s warranty, download the file below and flash your Lenovo A6000 through Stock Recovery mode. Just copy the downloaded zip file to your SD card and select “Install updates from SD card” in Stock Recovery Mode.
You can also use this Lenovo A6000 Android KitKat Kraft-A6000 S042_151012 Stock ROM to

downgrade your Lenovo A6000 Smartphone from Lollipop to KitKat.

Guide To Install:-

• Download the zip file and put it into your sd card
• 
• Then Reboot into recovery mode by Holding power button and volume up button for 5 to 6 second
• Release those buttons when Lenovo logo will appear for second time
•  
• Now choose The update form sd card option select the option by using volume down button
• Then select the zip file which you have downloaded before from the upper link
  
  
• wait for the process done
• then reboot your phone
• And Enjoy now

File Details:

File name: Kraft-A6000_S042_151012_WC29.zip
Android version: 4.4.4
Size: 1.04 GB Download

Read More

How to Flash OR Fix Software Problems in Lenovo Vibe K5 Plus A6020A46

• Lenovo Factory Stock ROM Firmware 

  Note:

1. Enable USB Debugging - Goto Settings > Additional settings > Developer options > USB   Debugging - Enable (If you have not activated Developer options, then Goto Settings > About phone > tap version 7OR 6 times > You are now a developer)
3. Battery is charged at least 50%.

 Below sort problems is hardware:
This method can be used without any box its done from flash tool it's also available here, and it is important to installing phones driver, you can't flash or upgrade if it is not installed on your computer or laptop it must be installed and also available in this post, here all are linked that tested and working fine just in one try you can easily solve any problem with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged,your USB socket will not proper work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Lenovo Vibe K5 Plus A6020A46

• Lenovo Vibe K5 Plus A6020A46 device with well battery charged, do not try with low battery
• Lenovo Vibe K5 Plus A6020A46 Stock ROM Firmware | Download
• Lenovo Vibe K5 Plus A6020A46 QFIL Flash Tool | Download
• Lenovo Vibe K5 Plus A6020A46 USB (Flashing) Driver | Download

Lenovo Vibe K5 Plus A6020A46

• First download tested Firmware, Flash tool or driver from above link (if link not working just leave your comment on below comment box i will soon fix it)
• Extract to all are zip files to desktop or as you like path (must be installed winrar software to Extract)
• Open Driver folder and choose Qualcomm_USB_Driver_Setup.exe file and wait until finish installation
• Open QPST.WIN.2.7_Installer-00430.1 folder and chose setup.exe file and open and install it
• Now open QFIL from the "C:\Program Files\Qualcomm\QPST\bin" path
• Go to Select Programmer option and click on Browse.. button and Select prog_emmc_firehose_8929.mbn from SW Folder file
• Click on Load XML.. button and choose rawprogram0.xml file and second choose patch0.xml file from the A6020a46_S042_160516_ROW_QPST folder
• Press and hold Volume Up + Down and Insert USB cable and wait until driver install
• After drier installed just Click on Download button and wait until finish process
• Congratulation you are done

 

Thanx..

 if you have any questions comment below!.......

Read More

Oppo Mobile Install Marshmallow Andriod 6.0

Oppo Mobile Install Marshmallow Andriod 6.0
AFTER STEPS BELOW.....

NOTE:

1. Make sure to back-up your data before you start the upgrade as all data will be wiped in the process.
2. Make sure there is more than 40% battery.
3.  Make sure there is at least 1.5GB free storage space on the phone or micro-SD card to download the software installation package.
4. The whole process of installation will take some time, please do not do other operations or power off your device during the installation process.

Step 1: Download the software package which correlates your model (R9 Plus, R9 or F1s) to the phone storage’s (or SD card) root directory     (ie not in any sub-folders).

  

Step 2:Go to Files – All files – (click SD card if you have downloaded the package to SD card) – select the zip file – Click Update now. (Figures below are shown as an example of SD card).

Step 3:Your device will then reboot and display the progress of upgrade (see figure below), which will take some time.  Please do not do other operations or power off your device during the process.

Step 4:After the progress bar is complete, the phone will reboot and remain on the OPPO logo for 3 to 5 minutes. Please do not power off the device as this is normal. 

Step 5:Once the phone is fully booted up, the standard start-up guide will show up to setup the language, region and Wi-Fi.  Upon completion of the guide, please check Settings – Dual SIM and mobile network – Preferred network type, and make sure you have selected 4G/3G/2G (Auto) as Preferred network type.

Step 6:And by now, congratulations, you have successfully upgraded the software.

SOFTWARE LINKS:

R9 PluS.....

http://downloads.oppo.com.s3.amazonaws.com/firmware/X9079%206.0/X9079EX_11_OTA_001_all_201703111638_wipe.zip

R9....

http://downloads.oppo.com.s3.amazonaws.com/firmware/_OTA_001_all_201703111638_wipe.zip

F1s....

http://downloads.oppo.com.s3.amazonaws.com/firmware_wipe.zip

Thanx...

if You Have Any Questions Comment Below!....

Read More

COOLPAD ROMS_Custom and stock ROMs for coolpad Note 3

Custom and stock ROMs for coolpad Note 3

STOCK ROM V15 (Credits: Zidane)

STOCK ROM V20

STOCK ROM V34 (Multi language support.Credits)

STOCK ROM V3

Marshmallow Stock ROM V22

Custom ROM:

                      By Atrvscet:

                                         AOSP ROM..

                                         VETAS ROM....

                                         360 OS....

                                          XUI Marshmallow.....

                                           COOLMOD......

                      By Pinto Thakur,Amit Kumar,Devendra milmile and Anis Mulla

                                           AOSP ROM.......

                 
                    By Dhana Mari,Pinto Thakur,Amit Kumar,Devendra milmile and Anis Mulla

                                        Flyme OS

                                        Cyanogenmod 12.1

                                        AOSP Marshmallow

                          By Tapan A. Shah

                                         Vibe UI

                           By TEAM COOLPAD:

                                         Eragon ROM

                             By Septian , M.A.D Team & Team extreme

                                              CM13


                                               AICP

                              By JAVED PATHAN

                                                AOSP MM

⏩⏩⏩⏩THANKYOU⏪⏪⏪⏪

If You Have Any Questions Comment Below..........

Read More

MIUI Devices INSTALL TWRP 3, ROOT & Utility - FLASHER TOOLKIT

FLASHER TOOLKIT Redmi 3S/Prime/3X

 Requirements:

• FLASHER TOOLKIT Redmi 3S/Prime/3X
• Minimal ADB and Fastboot
• UPDATE-SuperSU-v2.76

Note:

Enable USB Debugging - Goto Settings > Additional settings > Developer options > USB   Debugging - Enable (If you have not activated Developer options, then Goto Settings > About phone > tap MIUI version 7 times > You are now a developer)

Battery is charged at least 50%.

 

 

Step 1:Download "Minimal ADB and Fastboot" and install, download"UPDATE-                   SuperSU-v2.76.zip" and move to the "Download" folder of your phone.

 

step 2:Plug your device in an ON-STATE via USB cable to your PC/Laptop.

Step 3:Download and extract, "Run as administrator" and execute "FLASHER TOOLKIT LANDv1.bat" as shown below.

Step 4:Next, you see the menu for what you want to do, as mentioned on the highlight, choose Menu #1 to flash TWRP 3.0.0 and follow the on-screen instructions.

Step 5:It will check whether you have followed all the Essentials mentioned above, and when all are met, it will run accordingly and flawlessly.

Step 6:Once the flashing is done successfully, you will be asked to install UPDATE-SuperSU-v2.76.zip and GApps zip (optional), as shown below.

Step 7:Images after you successfully flashed the UPDATE-SuperSU-v2.76 and Open GApps.

Step 8:Use Root Checker to check whether you have Rooted your device properly, as shown below.

Redmi3s-r1-horz.png (485.52 KB, Downloads: 10)
Download  Save to the album

↭↭Now, that you have successfully flash custom recovery TWRP and rooted with SuperSU. Enjoy!

 

 

                            IF you Have Any Questions Comment Below!!!

Read More